META SQUARE stands for design diversity and high combinability. The square spout elbow in combination with the otherwise round and reduced design language makes the series aesthetically durable and at the same time changeable. The focus on the essentials and a consistent reduction in volume create the typical aesthetics of this modern kitchen fitting.
- 145mm projection
- Rigid, thermally insulated spout
- Laminar flow
- Height of mixer 249 mm
- Height up to laminar flow regulator 184 mm
- Hole diameter 35 mm
- Provides filtered, hot water up to 93°C
- Provides filtered, cold water
- Max. flow 2 l/min at 3 bar flow pressure
- Ready-to-use control unit for wall mounting (137mm x 159mm x 60mm)
- Electronic magnetic valve
- 100-230 V, 50-60 Hz, 18 W power supply unit, incl. country-specific adapter set
- Lead-free
- One lever for cold and hot water
- Spout ring cannot be removed.
- This product can help a building meet the requirements of Green Building Rating Systems, e.g. LEED®, BREEAM®, DGNB
- NOTE: Not compatible with Reverse Osmosis
- A minimum flow pressure of 3 bar is necessary for the HOT & COLD WATER DISPENSER to work perfectly in conjunction with a hot water tank and filter.
- In addition, the installation must be above a kitchen sink.
- The filter cartridge must be changed every six months. The installation instructions contain further information for guidance.
- Detailed planning information and technical data can be found at www.dornbracht.com/professional
| Product Number |
17 861 625-09 |
| EAN Number |
4099477111438 |
| Application area |
Kitchen |
| Construction type |
Floor mounting |
| Series correlation |
META 02, META SQUARE |
| Brand |
Dornbracht |
-
-
Type:
Kitchen Sink / Faucet Parts
Available for pickup only. Once you place your order, one of our designers will contact you to arrange pickup.
Extended warranties are usually very inexpensive and can save you thousands in the future.
It's simple and inexpensive to purchase extended warranties and one of the smartest ways to protect your investment.
Plumbing fixtures
can be large, heavy and expensive. You probably don't have the special tools or expertise needed to fix them in a crisis. If you can spare a few thousand dollars without batting an eyelash for new
fixtures
should they break tomorrow, don't buy a warranty. But if you're like most of us, protect yourself by purchasing inexpensive extended warranties when you buy a new product and save yourself big money in the long run.
